НГС device is a horizontal device with a membrane an external and internal anti-corrosion coating; it is heat-insulated.
The basic intended use of the device is to separate the oil mixture into oil and gas, as well as purify the associated gas from admixtures. 
The device has an internal coil for preheating liquid; it is equipped with an external heat-transfer medium - vapour from the industrial vapour unit.
The oil/gas separator skid has an APCS system that maintains process parameters during operation and prevents fluctuation beyond the set parameters.

a pressure regulating unit is a compilation of hardware that allows:

1) to control pressure after the well to the oil/gas separator unit;

2) measure the flow rate, temperature and pressure;

3) purify the gas and liquid mixture from proppant.

The pressure regulating unit piping has an actuated valve for protection from high pressure.

An underground tank completed with a submersible pump and process piping is used for draining and collecting sewage from the oil treatment mobile unit and the heat-transfer medium (water) from the oil pre-heater

Automated loading and metering systems (АСН) are designed to automatically load the product and meter the product commercial flow in mass (volume) units).
The complex is a framework base, pipelines on it, control and shutoff valves, instrumentation and automation.
The control and monitoring system is designed to control and monitor the processes in the complex.
The electrical equipment and instrumentation in the complete set are explosion-proof. The automation and control degree allows to avoid constant service personnel's supervision.

The oil pump station is designed to pump oil in the internal pumping systems of the oil treatment mobile unit. The station is also used to feed the treated oil into the interfield pipeline. Pump stations can be placed open-air, in a shelter or in a modular packaged unit.
Stations can be completed with: pumping devices; filtration systems; piping and cable hook-ups; control and shutoff valves; necessary automation devices; life support systems.
  The supplied skids are completed with equipment&process automated control systems. They allow to operate the station without constant service personnel's supervision.

  Terminal separation units are designed for complete degassing of oil until it reaches the required parameters of saturated vapour pressure; the units are used to purify the associated gas.
The terminal separation units has an open structure, is placed on a frame and includes process piping, control and shut-off valves, instrumentation and automation devices, electrical devices that maintain the process parameters at the set level.
Separators are mounted on pedestals because of height differences to make it possible to load the product to the electrical dehydrator and other equipment installed after the terminal separation units in the process chain.
Oil/gas separators can use the nominal pressure from 0.6 to 2.5 MPa, design pressure from minus 60°С to 100°С, volumes from 6.3 to 100 m3, diameters from 1,200 to 3,400 mm

The oil/gas separator with water knockout is oil and gas equipment used to separate the product into oil, gas and water. The separators are an important component skid in an oil gathering and treatment mobile unit, when the well product has a high water cut and takes water pre-separation to make the product transportation economical.
The separator skid has an open structure, is placed on a frame and includes process piping, control and shut-off valves, instrumentation and automation devices, electrical devices that maintain the process parameters at the set level.

Combined oil pre-heating skid is used to pre-heat ol of various viscosity and oil emulsion in the oil treatment mobile unit process.
The pre-heating skid consists of the following basic parts: - heating unit with a burner; - fan unit; - automation unit. The heating skid is designed to transfer heat produced by the fuel gas burning to the oil that should be heated. The heating skid is a vessel mounted on a base framework and filled with an intermediate heat carrier. The vessel has a furnace unit and a product coil hooked up in two flows. The furnace unit flange has the main and the pilot burners attached.  

Horizontal Flare Unit with remote ignition and control are designed to burn the associated gas, vapours and produced water in case of emergency, regular or routine water knockouts at the units.
The basic delivery set includes: - horizontal flare device completed with a pilot burner, a high-voltage electrode for flame ignition, a thermocouple to control the flame; - gas control unit (cabinet) on the pilot burner; - transformation skid with a high-voltage source.

Intended use and process functions of the fuel gas treatment and distribution skid БПТГ fuel gas treatment and distribution skids are placed in the oil treatment mobile units and designed to treat and sustainably feed fuel gas to the consumer. The system maintains certain parameters (pressure, purification degree, physical and chemical characteristics).
Basic process functions: - purification from solid impurities and condensed moisture, condensate blowdown - maintaining the required gas temperature on the skid outlet- reducing pressure to the set value and maintaining it at the required level- process and commercial metering of the flow rate Fuel gas treatment and distribution skid are delivered to the site of operation as a modular packaged unit. This allows their ready-to-operate condition and significantly reduces the time spent on installation. All the equipment is installed in the heat-insulated modular container which is a metal spacious frame covered with sandwich panels. Inside it is possible to install a heater, a ventilation system or other equipment. The fuel gas treatment and distribution skid's advantages - safety, high level of protection; - manual, remote and automated control of the processes; - balanced combination of the price, quality and functions; - all the equipment is placed in a single packaged module, which reduces the term for the construction and installation works.

  СР vent stacks are used to dispose gases and vapours from relief valves installed in vessels and devices operating mediums that are considered explosive or harmful.
The parameters of the produced vent stacks are defined by the type and amount of knockouts, pressure, hazard class, category and group of the medium, the place of installation and the operation temperature. The bearing structure of the vent stack can be made of bracing wire, can be self-bearing or stand on a tower.

The tank unit is a compilation of gas equipment including gas tanks, connecting tubes, manifolds, etc.
It is designed to extinguish fire on oil-preheaters.
The tanks are connected through separate shutoff valves, which allows to replace them one by one.

According to the customer's assignment tank units can be made in various modifications: stationary modification mounted on the wall of the premises Container modification Cabinet modification Rack-mounted modification